Uncover the "Inside Story" of the Mold Manufacturers Quotation

Because of its outstanding characteristics and high efficiency, cold stamping is very common in people's daily life and is very good at the mechanical processing level. Because the metal stamping parts can not go through the basic production and processing of turning, milling, grinding, etc., which saves time and labor, and can obtain very stable goods.

Nowadays, the mold industry is not very optimistic. For the manipulation of mold cost, every price of mold order information is very careful. In order to deal with everyone's doubts, the small editor of the mold manufacturer summarized some general mold price standards for everyone.

The quotation of the mould roughly includes the following contents:

1. Raw material cost: The raw material of the template is one of the key costs of each mold Z. Because the raw materials in China are not qualified, many will choose imported materials, especially for the punching needle and wound of the mold. All good raw materials must undergo post process "conditioning treatment".

2. Cost of post process "quenching and tempering treatment": at present, there are two kinds of common mold quenching and tempering treatment: universal quenching and tempering treatment and vacuum pump solution, and the cost of these two kinds of quenching and tempering treatment is very different.

General type quenching and tempering treatment: most of them are large and medium sized materials, and the raw materials themselves are not highly regulated. However, the price of this kind of quenching and tempering treatment is low, which is about 11 yuan/KG according to the net weight.

Vacuum heat treatment: just the opposite of the universal type, the basic ingredients and raw materials are highly regulated, and the actual effect is good, not easy to deform, but relatively expensive.

3. Precision production cost: precision production and processing is based on line cutting. In mold machining, line cutting costs account for a large proportion. And most of the calculation methods are based on the total area. According to the high efficiency and different models of wire cutting, the fast wire costs 0.0045 -- -0.005 yuan per cubic millimeter. Slow filament costs 0.02 yuan per cubic millimeter. Generally, slow filament is only used for production and processing if there is precision.

4. Cost of standard parts of moulds: the common standard parts of moulds can be roughly classified into three categories: elastic yellow parts, locating pins, guide sleeves and screws. Among them, the spring yellow can be divided into five colors: yellow, blue, red, green and tea according to its tone, and its elasticity has expanded successively.

5. Labor cost: this belongs to the uncertain value, which is generally calculated according to the average salary of 150-250 yuan per day.

6. Other costs: about including the cost of test pieces, printing raw materials, machining and die repair, die design scheme, management methods, etc.

7. Profitability: For technical molds, the profit is about 30% to 40% of the total cost, depending on the actual situation

Key points to pay attention to when quoting mold prices

Because the commodities are different, the prices cannot be the same. People must carefully observe. In addition to the cost, people must also analyze the following key points:

1. What raw materials and thickness are the commodities of the design scheme attributed to.

2. Whether the dimensional tolerance of the product is strict, and which level the production belongs to.

3. The complexity of commodity structure and the specification of mold structure and production and processing precision.

4. The usage of spare parts and after-sales maintenance service cycle.

5. Where is printing? And the requirements for the quantity of finished products after printing.

6. The stamping machine tools in the customer enterprises must be arranged to master the performance parameters of the other side's machines and equipment, so as to facilitate the design scheme.

Although the left and right key points are not very costly, they may not be of great importance to us alone. However, the price of people can not let go of any key point of me, which must be taken into account. In order to carry out accurate pricing, it is necessary to grasp the actual main parameters of important links and avoid all mistakes and omissions. This is related to the profitability of the connected mold and how much it can be profitable.