What safety problems should be paid attention to in the wholesale of metal extrusion processing dies?

Cold extrusion processing is mainly hardware processing, and safety accidents often occur in machine operation. How to reduce mechanical operation safety incidents? What safety problems should die manufacturers pay attention to? The following is worth reading:

We often hear the saying "safety first, prevention first" in our lives. It can be seen that safety depends on the prediction and prevention of dangers. Only with complete preparation can we prevent problems before they occur. What important safety operation rules should be paid attention to when processing hardware?

1、 Look:

1. Check whether the machine power is on, and eliminate the event from the source;

2. Whether the power supply and buttons are loose, so as to avoid failure or electric shock;

2、 Check:

1. Before entering the work post, check whether your clothes meet the work requirements. Do not wear slippers, high-heeled shoes or clothes that affect safety. Those with long hair should remember to wear safety helmets.

2. Before the machine works, check whether the moving part is filled with lubricating oil, then start and check whether the switch travel and brake are normal, and run the machine without load for 1-2 minutes. It is strictly prohibited to operate the machine in case of mechanical failure.

3、 Precautions during operation

During mechanical operation, it is prohibited to put your hand into the slider working area, and it is prohibited to take and place the workpiece by hand; When taking and placing workpieces in the die, it is necessary to use tools that meet the standards. In case of any abnormal sound or malfunction of the machine, the power switch should be turned off immediately for inspection. After the machine is started, one person shall transport materials and operate the machine. Others shall not press the electric building or step on the foot switch board. For the safety of others, they shall not put their hands into the mechanical work area or touch the moving part of the machine with their hands.

Prompt: everyone is responsible for safe production; Safe production and happy family; Chengda reminds you that no matter how busy you are in production, you will never forget your safety!